Rotem P-COMM-V1 - Internal and Battery Alarms; Internal Alarm Settings; Battery Alarm Configuration

Communicator | 3.05 42
10.3.5 Defining the Internal Alarms
• Go to ALARM > Options.
Internal alarms are generated by the Communicator unit (external alarms are generated by the
controllers). This menu defines:
• DELAY (seconds): Define the waiting time before the communicator generates an internal
message.
• REMINDER (minutes): After an alarm has been acknowledged but not dealt with, the
communicator recreates an internal message according to the amount of time defined. Define
the time in this option.
• POWER RESTORE MESSAGE: Define YES/NO for a message to be sent after a Power
Restore event
10.3.6 Defining the Battery Alarm
• Go to SYSTEM > Advanced Setup > Battery.
This menu defines the hold time (in seconds) before the communicator generates an alarm message
regarding the battery charge.
10.4 Alarm and Events History
This section details how to view records of alarms and events.
• Displaying the Alarm History, page 42
• Displaying the User Events, page 43
• Displaying the System Events, page 43
10.4.1 Displaying the Alarm History
• Go to HISTORY > Alarms.
This screen displays alarms from all houses as well as the Communicator (Communicator: 0 and
Houses: 1 – 64).
• Use +/- to toggle the SORT BY option from: H=House; D=Date; and C=Code.
• Scroll right to view message.
POWER OPTION
ALARM DELAY(S) 60
XT
3 07-FEB 240 
3 06-FEB 240 
4 07-FEB 240 
5 06-FEB 240 
LOG [SORT BY: H]
HOUSE DATE CODE
1 07-FEB 240 
2 05-FEB 240
