71 Communicator | 3.05
15.4 Installing a GSM-S or GSM-W Card
NOTE: Before installing a SIM card, disable the PIN code (if the card has this code). Communicator
text functions are disabled if the SIM card has a PIN code.
1. Turn off the Communicator
and open the cover.
2. Place the card in place.
Insert a SIM card into GSM-S to enable the Voice Dial-In
feature.
Insert a SIM card into GSM-W to enable the Voice Dial-In
feature.
NOTE: Refer to Configuring the Telephone Modem, page 18 for information regarding the Voice
Dial-In feature.
WARNING! Communicator does not support pre-paid SIM cards. Use a regular card only!
To Next Page
Loading...
