Rotem P-COMM-V1 - Alarm and Events History; Backup Battery Testing and Maintenance

43 Communicator | 3.05
10.4.2 Displaying the User Events
• Go to ALARM > User Events.
Any changes or events created by users from the address book appear in this table.
• Scroll right to view alarm and user number.
• Code is the alarm code.
10.4.3 Displaying the System Events
• Go to ALARM > System Events.
This menu displays all Communicator system events.
• Scroll right to view message.
10.5 Testing the Alarm Backup Batteries
To ensure that the Communicator continues to broadcast alarms in the event of a power outage, the
unit comes equipped with a set of 12 V backup batteries. These batteries must be kept properly
charged at all times.
WARNING! Failure to test your pack regularly and change the pack as required can result in
losses in the event of a general power failure!
Rotem strongly recommends:
• Checking the backup battery pack once a month (see the procedure below).
• Replacing the battery pack once a year, regardless of the test results.
USER EVENTS
DATE TIME CODE
18-JAN 16:16 2

07-FEB 11:47 2

SYSTEM EVENTS
DATE TIME CODE
18-JAN 16:16 2

07-FEB 11:47 2
