Rotem P-COMM-V1 - Setting up a Network Using Rotemnet

Communicator | 3.05 52
Figure 14: My RotemNet Home Page (Example)
7. Click to view the controller details.
Figure 15 appears.
Figure 15: Controller Data (Example)
• Rotem recommends the following resolutions when viewing the web:
o PC: 1280/1024 Text size medium
o Laptop: 1024/768 Text size medium
11.2.3 Setting Up a Network Using RotemNet
Accessing the Communicator or controllers via RotemNet enables local and remote management of
your equipment. The following is a summary of the steps needed to setup a remote network using the
RotemNet software. For complete instructions, refer to the RotemNet manual.
1. Using the provided CD, install and run RotemNet.
2. Refer to the following sections:
o Local Network
o Remote Network