Rotem P-COMM-V1 - Page 51

51 Communicator | 3.05
c. In the Password field, type 1.
The Register page appears.
d. Fill out all of the fields.
NOTE: The Allowed S/N is the Device S/N found in SYSTEM > Advanced Setup > Internet.
NOTE: If you want to add a picture to your Internet account, click Browse and select the file.
e. Type the CAPTCHA letters.
f. Click Submit.
A confirmation message will be sent to you.
5. In SYSTEM > Advanced Setup > Internet > My Account
a. Edit the IP number or address (myrotem.net) and PORT number as required.
b. In the Name field, type the name.
c. In the Account name, type the account name that you chose on the myrotemnet page.
d. In the Users field, type the maximum number of users that can simultaneously access the
network.
e. Click Save.
The Internet connection is now configured.
6. In a web browser, go to http://www.myrotem.net
and login using the name and password that
you chose.
Figure 14 appears
• If the Communicator is defined correctly, it is displayed on the site with its name and its status
is a green circle.
• If the Communicator is not defined correctly, it does not appear on the screen.
• The red exclamation mark (!) indicates that the chip is not online. This means that there is a
connectivity problem, lost internet connection, or other possible problems. It does not mean
that the Communicator is not defined properly.
Port: 1500
Name: Rotem
Account: <Farm 1
Users: 03
INTERNET
DEVICE SN: 140011BD
[SERVER]
IP: 80.179.187.139