25 Communicator | 3.05
5.4 Common Functions
The following sections detail the technician tools.
• Go to SYSTEM > Technician Tools.
This menu provides testing tools used by an authorized technician only.
• Test
• Message Options
• Hyper Terminal
• Monitor
5.4.1 Test
• PHONE LINE: Measures the line voltage.
• INTERNET: (TBD).
• RELAYS: Toggle Relays 1, 2 and Alarm relay status by pressing ENTER.
• DIGITAL INPUT: Displays the status of the eight digital inputs.
• MEMORY: Performs EEPROM test by pressing the MENU key.
• KEYBOARD: Tests the functionality of each key. Test keys by pressing them and verifying
visually that the right key is displayed on the screen.
5.4.2 Message Options
This parameter specifies the number of times Communicator places a call to a recipient (until the
recipient presses "1").
• Under Call ACK Retries, enter the required numbers.
o Range: 1 – 10
o Default: 1
NOTE: Version 3.05 and higher supports this parameter.
5.4.3 Hyper Terminal
This is a dedicated function for system integrators ONLY!
5.4.4 Monitor
TBD
TEST 4
MESSAGE OPTIONS 1
HYPER TERMINAL YES
To Next Page
Loading...
