Keeping the World Flowing
3
1.0 Introduction 2.0 Standards & Regulations
This manual covers maintenance aspects and instructions
specific to the GP range of actuators. General information
on Rotork Fluid Systems actuators are described in the User
Manual, delivered separately.
In this manual, warning indications are represented by icons,
according to ISO 7010 Safety Signs:
Generic danger
Hand crush
/
pinch point
Electrocution
Explosive material
Customer Service
For technical assistance, please contact the
Rotork Fluid Systems Customer Service:
E-mail: rfs.internationalservice@rotork.com
Rotork Fluid Systems, Via Padre Jaques Hamel 138B,
Porcari, Lucca, IT. Tel: +39 0583-222-1
Rotork plc, Brassmill Lane, Bath, UK. Tel +44 (0)1225 733200
Actuators destined for European member states have been
designed, built and tested according to the Quality Control
System, in compliance with the EN ISO 9001:2015 standard
and with the following regulations/directive.
•
2006/42/EC: Machinery Directive.
•
2014/68/EU: Pressure Equipment Directive (PED).
•
2014/34/EU: Directive for safety equipment and systems
to be used in potentially explosive atmospheres (ATEX).
•
2014/30/UE: Electromagnetic Compatibility Directive.
•
EN ISO 12100: Machinery Safety Directive.
•
EN 60079-14: Explosive atmospheres - Part 14: Electrical
installations design, selection and erection.
•
ISO 80079-36: Non-electrical equipment for explosive
atmospheres - Basic method and requirements.
•
EN 1127–1: Explosive atmospheres – Explosion prevention
and protection.
•
ISO 80079-37: Non-electrical equipment for explosive
atmospheres - Non-electrical type of protection
construction safety "c", control of ignition sources "b",
liquid immersion "k".
•
UNI EN ISO 7010: Safety Signals.
A4US
US
A4
US A4
US
A4
A4 US
US
A4
US
A4
A4 US
To Next Page
Loading...
Need help?
General
