Keeping the World Flowing
79
18.0 Grease & Hydraulic Oil Specification
This is the standard oil specification for Rotork Fluid Systems hydraulic
manual override and hydraulic cylinders working at temperature
between -40 °C and +100 °C for ATEX and non-ATEX application.
Manufacturer: MOBIL
Trade Name: DTE 10 EXCEL 15
ISO Viscosity Grade: 15
Viscosity, ASTM D 445
cSt @ 40 °C
cSt @ 100 °C
15.8
4.07
Viscosity Index, ASTM D 2270 158
Brookfield Viscosity ASTM D 2983 cP @ -40 °C 2620
Tapered Roller Bearing (CEC L-45-A-99), %Viscosity Loss 5
Density 15 °C, ASTM D 4052, kg/L 0.8375
Copper Strip Corrosion, ASTM D 130, 3 hrs @ 100 ºC 1B
Pour Point, °C, ASTM D 97 -54
Flash Point, °C, ASTM D 92 182
Foam Sequence I, II, III, ASTM D 892, ml 20/0
Dielectric Strength, ASTM D877, kV 45
Acute Aquatic Toxicity (LC-50, OECD 203) Pass
This is the standard oil specification for Rotork Fluid Systems hydraulic
manual override and hydraulic cylinders working at temperature
down to -60 °C for non-ATEX applications.
Manufacturer: MOBIL
Trade Name: UNIVIS HVI
ISO Viscosity Grade: 32
Viscosity, ASTM D 445
cSt @ 40 °C
cSt @ 100 °C
13.5
5.3
Viscosity Index, ASTM D 2270 404
Kinematic Viscosity @ -40 ºC, ASTM D 445 371 cST
Copper Strip Corrosion, ASTM D 130 1A
Pour Point, °C, ASTM D 97 -60 °C
Flash Point, °C, ASTM D 92 101 °C
This is the standard oil specification for Rotork Fluid Systems hydraulic
manual override and hydraulic cylinders working at temperature
between -60 °C and +90° C for ATEX application.
Manufacturer: TECCEM
Trade Name: SynTop 1003 FG
ISO Viscosity Grade: 3
Viscosity, ASTM D 445
cSt @ -40 °C
cSt @ -55 °C
cSt @ 40 °C
73
2.6
3.2
Pour Point, °C, ASTM D 97 -88 °C
Flash Point, °C, ASTM D 92 140 °C
Density 20° C, kg/L 0.86
An alternative oil may have been specified for your application. Please refer to the job specific documentation.
A4 US
US
A4
US
A4
A4 US
To Next Page
Loading...
Need help?
General
