Royal 220DX - Page 28

23
E: 0 = the electronic journal function is not activated
1 = the electronic journal function is activated  Default
(2) Terminal Status 2
F 0 2 - A B C D
E
A：
0 = not allow direct tender
1 = allow direct tender
 Default
B：
0 = normal payment
 Default
1
= the inputted amount must be bigger or equal to the total
amount.
C：
Support the zero transaction.
0
= Not allowed

Default
1 = allowed
D：
Reprint the receipt after tender directly or not.
0
= Not reprint

Default
1 = Reprint
E：
the logo print position
0 =The logo image is printed at the end of the receipt.
1
= The logo image is
printed
above the
“Welcome message”

Default
(3) Terminal Status 3
F 0 3 -
A B C D
E
A：
0
= T
he Stock Function is not allowed
 Default
1
= T
he Stock Function is allowed
B：
0 = The receipt is not printed.
1 = The receipt is printed.
 Default
C：
0 = Clerk function is not activated.
 Default
1 = Clerk function is activated.
Change “1” to “0” condition:
The sales total memory must be blank, if not, take Z
-
clerk report (daily and
PTD) first.
Note:
When the clerk function is inactivate, all clerk operation will be invalid.
D：
0 = subttl not printing when depress the subttl key.
 Default
1 =
subttl
printing when depress the
subttl
key.