Royal 220DX - Page 29

24
E:
0 = The #/No Sale message is not printed when perform No Sale
operation.
1
= The #/No Sale message is printed when
pe
rform
No Sale
operation.
 Default
(4) Terminal Status 4
F 04 - A B C D E
A：
0 = VAT Version.
1 = Tax Version.
 Default
Change condition:
1. When the register has just initialized.
2. When the register ha
s registration data, must make sur
e all
reports are reset and the grand total is blank.
B：
Tax Rounding
0 = Round Off (5/4)
 Default
1 = Round Up
2 = Discarding
C：
0 = Not Keep the Tax Shift status when press the tax shift key.
 Default
1 = Keep the Tax Shift status
when press the
tax shift
key.
D：
Print the PLU barcode on PLU report.
0
=No

Default
1 = Yes
E：
Character format for the KP printer.
1
= Normal

Default
2 = Double Height
3 = Double Width
4 = Double
Width
&
Height
(5) Terminal Status 5
F 05 - A
B
C
D
E
A: 0 = Zero Not skip in X (Z) Report.
1 = Zero skip in X (Z) Report.
Default
B：
0
= Receipt Consecutive Number is not reset after Daily Z
Report.
 Default
1= Receipt Consecutive Number is reset after Daily Z Report.
C：
0 = The key dept shift is not allowed.
1 = The key dept shift is allowed.
 Default
D：
Print font control in X/Z mode
0 = X/Z mode print normal font
 Default
1 = X/Z mode print compress font