124
IP Option:
A list of optional specifications for security restrictions, route
recording, and source routing. Not every datagram specifies an
options field.
Range: Any / Yes / No
Any: Including all IP option case
Yes: The ingress frame is specified IP options
No: The ingress frame is not specified IP options
SIP Filter: (SIP Source IP Address)
Range: Any / Host / Network
Any: Including all source IP address
Host: Only one specific source host IP address
Network: A specific IP subnet segment under the source IP mask
SIP Address:
Default: 192.168.1.1
SIP Mask:
Default: 255.255.255.0
DIP Filter: (DIP Destination IP Address)
Range: Any / Host / Network
Any: Including all destination IP address
Host: Only one specific destination host IP address
Network: A specific IP subnet segment under the destination IP
mask
DIP Address:
Default: 192.168.1.254
DIP Mask:
Default: 255.255.255.0
IP Parameters: (Frame Type = IPv4 and IP Protocol Filter = ICMP)
ICMP Type Filter:
Range: Any / Specific
Any: Including all types of ICMP type values
Specific: According to following ICMP type value setting for ingress
classification
ICMP Type Value:
Range: 0-255
ICMP Code Filter:
Range: Any / Specific
Any: Including all of ICMP code values
Specific: According to following ICMP code value setting for ingress
classification
To Next Page
Loading...
