Ruby Tech GS-2224L - Set Pvid

283
set port-role
Syntax:
set port-role <range> <access|trunk|hybrid> [vid]
Description:
To set egress rule: configure the port roles.
Argument:
<range> :which port(s) you want to set, syntax 1,5-7, available from 1 to 24
<access>: Do not tag frames
<trunk>: Tag all frames
<hybrid>: Tag all frames except a specific VID
<vid>: untag-vid for hybrid port
Possible value:
<range>: 1 to 24
<vid>: 1 to 4094
Example:
GS-2224L(vlan)# set port-role 5 hybrid 6
set pvid
Syntax:
set pvid <range> <pvid>
Description:
To set the pvid of vlan.
Argument:
<range>: which port(s) you want to set PVID(s),
syntax 1,5-7, available from
1 to 24
<pvid>: which PVID(s) you want to set, available from 1 to 4094
Possible value:
<range>: 1 to 24
<pvid>: 1 to 4094
Example:
GS-2224L(vlan)# set pvid 3,5,6-8 5