Ruby Tech GS-2224L User Manual

166
3-13-3 Instance View
Function name:
MSTP Instance Config
Function description:
Providing an MST instance table which include information(vlan membership
of a MSTI ) of all spanning instances provisioned in the particular MST region
which the bridge belongs to. Through this table, additional MSTP configuration
data can be applied and MSTP status can be retrieved.
Parameter description:
Instance ID:
Every spanning tree instance need to have a unique instance ID within
0~4095. Instance 0 (CIST) always exists and can not be deleted.
Additional spanning instances (MSTIs) can be added or deleted. At least
one vlan must be provisioned for an MSTI to declare the need for the
MSTI to be existent.
Corresponding Vlans:
0-4095.
Multiple vlans can belong to an MSTI. All vlans that are not provisioned
through this will be automatically assigned to Instance 0(CIST).
Edit MSTI / Vlan:
Fig. 3-157
To add an MSTI and provide its vlan members or modify vlan members
for a specific MSTI.
Del MSTI:
To delete an MSTI.
Del All MSTI:
Deleting all provisioned MSTIs at a time.
Instance Configuration:
Fig. 3-158
To provision spanning tree performance parameters per instance.
Port Config:
Fig. 3-159
To provision spanning tree performance parameters per instance per port.
Instance Status:
Fig. 3-160
To show the status report of a particular spanning tree instance.
Port Status:
Fig. 3-161
To show the status report of all ports regarding a specific spanning tree
instance.

Ruby Tech GS-2224L Specifications

General

Brand	Ruby Tech
Model	GS-2224L
Category	Switch
Language	English

Summary

1. Introduction

1-3. Features

Details the hardware and management features of the GS-2224L switch.

2. Installation

2-1-4. Configuring the Management Agent of GS-2224L

Explains how to configure the switch's management interface via RS-232 or Ethernet.

2-1-5. IP Address Assignment

Explains IP address structure, classes, subnet masks, and private IP address blocks.

3. Operation of Web-based Management

3-1-4. IP Configuration

Guides on configuring the switch's IP address, subnet mask, default gateway, and DNS.

3-3. VLAN

Explains VLAN concepts and configuration, supporting Tag-based and Port-based VLANs.

3-8. ACL

Explains Access Control Lists (ACLs) for packet filtering based on various parameters.

3-10. 802.1X Configuration

Explains 802.1X port-based network access control for user authentication.

3-12. STP Configuration

Details Spanning Tree Protocol (STP) configuration for avoiding network loops.

3-20. Diagnostics

Covers device self-diagnostics, including diagnostics, loopback, and ping tests.

4. Operation of CLI Management

4-1-1. Login

Details the process of logging into the switch via the command-line interface (CLI).

4-2. Commands of CLI

Lists and categorizes available CLI commands, including global and local commands.

5. Maintenance

5-1. Resolving No Link Condition

Lists possible causes for a "no link" LED status on switch ports.

Appendix A Technical Specifications

Appendix B Null Modem Cable Specifications