Ruby Tech GS-2224L - Dhcp Snooping; DHCP Snooping State

181
3-17. DHCP Snooping
3-17-1. DHCP Snooping State
Function name:
DHCP Snooping State
Function description:
The addresses assigned to DHCP clients on unsecure ports can be carefully
controlled using the dynamic bindings registered with DHCP Snooping. DHCP
snooping allows a switch to protect a network from rogue DHCP servers or
other devices which send port-related information to a DHCP server. This
information can be useful in tracking an IP address back to a physical port.
Fig. 3-17-1 DHCP Snooping State
Parameter description:
DHCP Snooping state: The parameter which set to disabled or enabled
the DHCP snooping function on the switch, the
default is Disabled.
Note: To click ” Apply” when you finish the configuration.
Fig.3-62
DHCP Snoo
p
in
g
State
DHCP Snoo
p
in
g
Entr
y
DHCP Snoo
p
in
g
DHCP Snoo
p
in
g
Client