Ruby Tech GS-2224L User Manual

205
set auth-server
Syntax:
set auth-server <ip-address> <udp-port> <secret-key>
Description:
To configure the settings related with 802.1X Radius Server.
Argument:
<ip-address> : the IP address of Radius Server
<udp-port> : the service port of Radius Server(Authorization port)
<secret-key> : set up the value of secret-key, and the length of secret-key is
from 1 to 31
Possible value:
<udp-port > : 1~65535, default is 1812
Example:
GS-2224L(802.1X)# set auth-server 192.168.1.115 1812 WinRadius
set suppTimeout
Syntax:
set suppTimeout <port-range> <value>
Description:
A timer used by the Backend Authentication state machine in order to determine
timeout conditions in the exchanges between the Authenticator and the Supplicant
or Authentication Server. The initial value of this timer is either suppTimeout or
serverTimeout, as determined by the operation of the Backend Authentication state
machine.
Argument:
<port range> : syntax 1,5-7, available from 1 to 24
<value> : timer , range 1-65535
Possible value:
<port range> : 1 to 24
<value> : 1-65535, default is 30
Example:
GS-2224L(802.1X)# set suppTimeout 2 30
set txPeriod
Syntax:
set txPeriod <port-range> <value>
Description:
A timer used by the Authenticator PAE state machine to determine when an EAPOL
PDU is to be transmitted
Argument:
<port range> : syntax 1,5-7, available from 1 to 24
<value> : timer , range 1-65535
Possible value:
<port range> : 1 to 24
<value> : 1-65535, default is 30
Example:
GS-2224L(802.1X)# set txPeriod 2 30

Ruby Tech GS-2224L Specifications

General

Brand	Ruby Tech
Model	GS-2224L
Category	Switch
Language	English

Summary

1. Introduction

1-3. Features

Details the hardware and management features of the GS-2224L switch.

2. Installation

2-1-4. Configuring the Management Agent of GS-2224L

Explains how to configure the switch's management interface via RS-232 or Ethernet.

2-1-5. IP Address Assignment

Explains IP address structure, classes, subnet masks, and private IP address blocks.

3. Operation of Web-based Management

3-1-4. IP Configuration

Guides on configuring the switch's IP address, subnet mask, default gateway, and DNS.

3-3. VLAN

Explains VLAN concepts and configuration, supporting Tag-based and Port-based VLANs.

3-8. ACL

Explains Access Control Lists (ACLs) for packet filtering based on various parameters.

3-10. 802.1X Configuration

Explains 802.1X port-based network access control for user authentication.

3-12. STP Configuration

Details Spanning Tree Protocol (STP) configuration for avoiding network loops.

3-20. Diagnostics

Covers device self-diagnostics, including diagnostics, loopback, and ping tests.

4. Operation of CLI Management

4-1-1. Login

Details the process of logging into the switch via the command-line interface (CLI).

4-2. Commands of CLI

Lists and categorizes available CLI commands, including global and local commands.

5. Maintenance

5-1. Resolving No Link Condition

Lists possible causes for a "no link" LED status on switch ports.

Appendix A Technical Specifications

Appendix B Null Modem Cable Specifications