Ruby Tech GS-2224L

253
6 Auto Disabled 9600 Discard salesdepartment
7 Auto Disabled 9600 Discard salesdepartment
8 Auto Disabled 9600 Discard salesdepartment
9 Auto Disabled 9600 Discard
set excessive-collision
Syntax:
set excessive-collision <port-range> <discard|restart>
Description:
To set port description
Argument:
<port range> syntax : 1,5-7, available from 1 to 24
Possible value:
<port range> : 1 to 24
Example:
GS-2224L(port)# set excessive-collision 6-10 restart
GS-2224L(port)# show config
Speed/ Flow Maximum Excessive
Port Duplex Control Frame Collision Description a list of
previously run command set priority
---- --------- -------- ------- --------- --------------------------------
DISCAR
2 Auto Disabled 9600 Discard
3 Auto Disabled 9600 Discard salesdepartment
4 Auto Disabled 9600 Discard salesdepartment
5 Auto Disabled 9600 Discard salesdepartment
6 Auto Disabled 9600 Restart salesdepartment
7 Auto Disabled 9600 Restart salesdepartment
8 Auto Disabled 9600 Restart salesdepartment
9 Auto Disabled 9600 Restart
10 Auto Disabled 9600 Restart
11 Auto Disabled 9600 Discard
set flow-control
Syntax:
set flow-control <port-range> <enable|disable>
Description:
To set per-port flow control
Argument:
<port-range>: syntax 1,5-7, available from 1 to 24
Possible value:
<port-range>: 1 ~ 24
Example:
GS-2224L(port)# set flow-control 3-10
GS-2224L(port)# show config
1 Auto Disabled 9600 Doscard
2 Auto Disabled 9600 Discard