Ruby Tech GS-2224L - Page 265

255
10half: set speed/duplex 10M Half
10full: set speed/duplex 10M Full
100half: set speed/duplex 100M Half
100full: set speed/duplex 100M Full
1Gfull: set speed/duplex 1G Full
Possible value:
<port-range>: 1 to 24
<port-speed>: auto, 10half, 10full, 100half, 100full, 1Gfull
Example:
GS-2224L(port)# set speed 3 auto
GS-2224L(port)# show status
Speed/
Port Link Duplex Rx Pause Tx Pause Description
---- ---- --------- -------- -------- --------------------------------
1 Up 100M/Full Disabled Disabled
2 Down Down Disabled Disabled
3 Up 100M/Full Disabled Disabled
4 Down Down Disabled Disabled
5 Down Down Disabled Disabled
6 Down Down Disabled Disabled
7 Up 1G/Full Disabled Disabled
8 Down Down Disabled Disabled
9 Down Down Disabled Disabled
show config
Syntax:
show config
Description:
To display the each port’s configuration information.
Argument:
None.
Possible value:
None.
Example:
GS-2224L(port)# show config
Speed/ Flow Maximum Excessive
Port Duplex Control Frame Collision Description
---- --------- -------- ------- --------- --------------------------------
1 Auto Disabled 9600 Discard
2 1G/Full Disabled 9600 Discard
3 Auto Disabled 9600 Discard
4 1G/Full Disabled 9600 Discard
5 1G/Full Disabled 9600 Discard
6 Auto Disabled 9600 Discard
7 Auto Disabled 9600 Discard
8 Auto Disabled 9600 Discard
9 Auto Disabled 9600 Discard
10 Auto Disabled 9600 Discard
11 Auto Disabled 9600 Discard