263
<<rate>>
set
Syntax:
set <range> <policer enabled> <rate> <unit> <shaper enabled> <rate> <unit>
Description:
To set rate limit configuration
Argument:
<range syntax> : 1,5-7, available from 1 to 24
<policer enabled> : 1 means enable and 0 means disable
<rate>: allowed values are 500kbps-1Gkps
<unit>: 'k' means kbps and 'm' means mbps
<shaper enabled>: 1 means enable and 0 means disable
<rate>: allowed values are 500kbps-1Gkps
<unit>: 'k' means kbps and 'm' means mbps
Possible value:
range syntax: 1,5-7, available from 1 to 24
policer enabled: 1 means enable and 0 means disable
rate: allowed values are 500kbps-1Gkps
unit: 'k' means kbps and 'm' means mbps
shaper enabled: 1 means enable and 0 means disable
rate: allowed values are 500kbps-1Gkps
unit: 'k' means kbps and 'm' means mbps
Example:
GS-2224L(qos-rate)# set 2 1 1000 m 1 1000 m
GS-2224L(qos-rate)# show
2 V 1000 Mbps V 1000 Mbps
3 500 kbps 500 kbps
4 500 kbps 500 kbps
5 500 kbps 500 kbps
6 500 kbps 500 kbps
7 500 kbps 500 kbps
8 500 kbps 500 kbps
9 500 kbps 500 kbps
10 500 kbps 500 kbps
<< storm >>
set broadcast
Syntax:
set broadcast <status> <rate>
Description:
To set broadcast storm control configuration
Argument:
<status> : 1 means enable and 0 means disable
<rate> : 1, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1k, 2k, 4k, 8k, 16k, 32k, 64k, 128k
, 256k, 512k
To Next Page
Loading...
