269
set config
Syntax:
set config <Bridge Priority> <Hello Time> <Max. Age> <Forward Delay>
Description:
To set up the parameters of STP.
Argument:
<Bridge Priority>:priority must be a multiple of 4096, available from 0 to 61440.
<Hello Time>: available from 1 to 10.
<Max. Age>: available from 6 to 40.
<Forward Delay>: available from 4 to 30.
Note: 2*(Forward Delay -1) >= Max Age
Max Age >= 2*(Hello Time +1)
Possible value:
<Bridge Priority>: 0 to 61440
<Hello Time>: 1 to 10
<Max. Age>: 6 to 40
<Forward Delay>: 4 to 30
Example:
GS-2224L(stp)# set config 61440 2 20 15
set port
Syntax:
set port <range> <p
ath cost> <priority> <edge_port> <admin p2p
>
Description:
To set up the port information of STP.
Argument:
<range>: syntax 1,5-7, available from 1 to 24
<path cost>: 0, 1-200000000. The value zero means auto status
<priority>: priority must be a multiple of 16, available from 0 to 240
<edge_port> : Admin Edge Port, <yes|no>
<admin p2p>:
Admin point to point, <auto|true|false>
Possible value:
<range>:1 to 24
<path cost>: 0, 1-200000000
<priority>: 0 to 240
<edge_port>: yes / no
<admin p2p>: auto / true / false
Example:
GS-2224L(stp)# set port 1-16 0 128 yes auto
To Next Page
Loading...
Need help?
General
