Ruijie Reyee RG-EW300-PRO

Web-based Configuration Guide Networks Settings
80
Parameter
Description
Service Port
Indicates the port for OpenVPN service. Use the default value unless
there are specific requirements.
VPN Subnet/Netmask
Indicates the network segment of the OpenVPN address pool. The first
available IP address in the address pool is reserved for the server, while
other addresses can be allocated to clients. For example, if this parameter
is set to 10.80.12.0/24, then the virtual IP address of the VPN server is
10.80.12.1.
Client Access
Home Network Only: If this access mode is selected, then the client can
only access resources on the server’s internal network, but is unable to
access the Internet through the server’s network proxy.
Internet and Home Network: If this access mode is selected, then the
client not only can access resources on the server’s internal network, but
also can access the Internet through the server’s network proxy.
(4) Click Expand to show advanced settings. Use the default values unless there are specific requirements.
(5) Click Export next to Configuration File to export the .ovpn file which can be imported on the client side.
Unless there are specific requirements, you do not need to export the CA certificate.