EasyManuals Logo

Ruijie Reyee RG-EW300R Configuration Guide

Ruijie Reyee RG-EW300R
54 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #31 background imageLoading...
Page #31 background image
Web-based Configuration Guide
10
Caution
Changing the IP address and subnet mask will disconnect the Wi-Fi network. You need to reconnect to the Wi-
Fi network. Therefore, exercise caution when performing this operation.
4.3 Changing the MAC Address
Caution
This feature is supported by only the router mode and the WISP mode.
The ISP may restrict the access of devices with unknown MAC addresses to the Internet for the sake of security.
In this case, you can change the MAC address of the WAN port to another address. You are advised to use the
MAC address of an old router that is allowed to access the Internet (the MAC address can be found on the
bottom label of the device).
Mobile Phone View: Choose More > Switch to PC view > More > Basics > WAN > Advanced Settings.
PC View: Choose More > Basics > WAN > Advanced Settings.
Enter the MAC address in the format of 00:11:22:33:44:55.
If you want to change the MAC address of the LAN port, choose Basics > LAN.
Caution
Changing the MAC address of the LAN or WAN port will disconnect the network. You need to reconnect to the
mesh repeater or restart the mesh repeater. Therefore, exercise caution when performing this operation.

Table of Contents

Other manuals for Ruijie Reyee RG-EW300R

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Ruijie Reyee RG-EW300R and is the answer not in the manual?

Ruijie Reyee RG-EW300R Specifications

General IconGeneral
BrandRuijie
ModelReyee RG-EW300R
CategoryRepeater
LanguageEnglish