Web-based Configuration Guide
19
Binding a Static IP Address
Mobile Phone View: Choose More > Switch to PC view > More > Basics > LAN > Static IP Addresses.
PC View: Choose More > Basics > LAN > Static IP Addresses.
Click Add. In the displayed static IP address dialog box, enter the MAC address and IP address of the target
client, and click OK. After a static IP address is bound, the client will be assigned with the specified IP address.
4.9 Configuring DNS
4.9.1 Local DNS
When the WAN interface runs DHCP or PPPoE protocol, the device automatically obtains the DNS server
address. If the primary router does not deliver the DNS server address or the DNS server needs to be changed,
you can manually configure a new DNS server.
Mobile Phone View: Choose More > Switch to PC view > More > Advanced > Local DNS
PC View: Choose More > Advanced > Local DNS
Local DNS Server: Configure the DNS server address used by the local device. If there are multiple DNS
addresses, separate them with spaces.