Web-based Configuration Guide Overview
1
1 Overview
The EW300R mesh repeater uses binaural antennas to support 2.4 GHz dual bands and is equipped with two
independent signal amplification chips. It can extend the dual-band Wi-Fi coverage. The maximum wireless rate
of the entire device is 1200 Mbps. The EW300R can extend the signals of other devices, and can also connect
to the Internet independently.
The signals that the EW300R can extend are:
Wi-Fi of any model from Reyee.
Wi-Fi of other vendors' devices. The compatibility problem may exist.
For the open hotspots in the merchant stores, the repeater function may be denied. The signals may not be
extended. In addition, open networks have security risks, so it is not recommended to extend such signals.
Caution
The supported encryption types include WPA-PSK, WPA2-PSK, and WPA-PSK/WPA2-PSK. If you want to
extend encrypted signal, please enter the correct Wi-Fi password.
1.1 Network Interface
In the factory settings state, the network interface works in WAN mode, which can be connected to an optical
modem as a router. To log in to the web page of the mesh repeater, connect to the Wi-Fi of mesh repeater.
1.2 System Status LED
The device is functioning properly. / The port has made a successful
link.
To Next Page
Loading...
Need help?
General