RYOBIPCS-F
1-1 Outline
ll!i5$§~
This device is made up
of
the remote control ink fountain and operation stand. With the input from the operation
stand, the remote control opening and closing
of
each ink fountain key is done.
The ink fountain key opening and closing data can be saved on a floppy disk. This data can be read again, and is
used to preset the ink fountain key.
(Note)
1.
When mounting the cables between the press and operation stand, fix the cables with the cable cover so
as not to obstruct the operators working area around the press.
2.
For
the place where this system is installed, please prepare a light
of
over 1,500 lux.
3. The LCD ''Liquid Crystal Display" is used for the message indication on the operation stand, therefore do
not install the operation stand
in
a place with a high temperature [over
35•c
(95.F)] and high humidity.
If
it is used under such conditions, the image brightness
of
the display may not be even.
Optional Accessories Edition - 1
To Next Page
Loading...
