Chapter 1 Press Outline
Press without Semiautomatic Plate Changer
Press with Semiautomatic Plate Changer
Printing press: 2
kW
2.2kW*
Power Consumption
Dampening solution cooling/circulation
2.8kW
device
:0.5kW
Motor Wattage
Main motor :
1.5
kW
Pump motor : 550 W
Dimensions
(L
x W x
H)
2,329 X
873
X 1,583
mm
(7'8" X 2'1" X 5'2")
Net Weight
1,300 kg (2,866lbs.) 1,330 kg (2,932 lbs.)
(Note)* : There are areas that the dampening solution cooling/circulation device is not equipped as a standard.
For
these areas, the * identifies the power and power consumption.
Design and specifications are subject to change without notice.
Specifications
may
slightly differ depending on the country.
<Optional accessories>
The following items are optional accessories.
The operation
of
the optional accessories (
1)
through ( 6) is explained in this manual. For the explanation
of
the other
optional accessories, please see each individual instruction manual.
(1) RYOBI PCS-F ( • Optional Accessories - 1)
(2) Blanket cleaning device ( • Optional Accessories - 25)
(3) Double sheet detector (Electronic type) ( • Introduction
Edition-
12 and 17)
( 4) Multi-size paper pile board ( • Operation Edition- 27)
(5) Print counter (total number
of
printed sheets, 8-digit, non-resettable) ( • Introduction
Edition-
23)
(6) Intermediate tank* ( • Operation Edition-
9,
Maintenance
Edition-
32)
(7) Tape inserter
(8)
!Press
without
Semiautomatic
Plate
Changer'.!
RP520-220F high-precision register punch
(9) Exclusive parts for envelopes
(10) Envelope feeder and delivery device
(Note)*
:The
intermediate tank is only mounted on the dampening solution cooling/circulation device.
Introduction Edition - 2
To Next Page
Loading...
