Sacher Lasertechnik
Group
User Manual Laser Diode Controller PilotPC 10
Configuration 4 (common anode)
For proper and safety operation you have to select the right laser setup
settings in the LASER SETUP menu.
The following list gives you the correct polarity setting.
Configuration Polarity
Configuration 1 (common cathode) Positive
Configuration 2 Negative
Configuration 3 Positive
Configuration 4 (common anode) Negative
Constant Current/Power
Controller
Safety
Relay Control
Interlock
Control
1 = Interlock
2 = Photodiode Cathode
3 = Ground for Laser Diode
4 = Photodiode Anode
5 = GND for Interlock
6 = Safety Relay Plus
7 = Laser Diode Minus
8 = Laser Diode Plus
9 = Safety Relay Minus
S = Shielding
1
2
3
4
5
6
7
8
9
S
Laser Diode Controller
Laser Diode
To Next Page