9/11
TALEA Section 07
REV00 - August 06
To remove the upper grinder support, use a wrench, turning it clockwise to release the
grinder support from the bayonet coupling.
On the lower burr, keep the increment pin as
indicated locked in position and proceed as
shown in the figure above.
When refitting the upper grinder sup-
port, take care to reposition the mark as
shown in the picture.
To remove the upper burr, rotate
anti-clockwise until it detaches from
the bayonet coupling.
7.9 Coffee grinder setting, assembly and disassembly
To Next Page
Loading...
