Need help?Do you have a question about the Sagem Securite MorphoAccess J-Bio and is the answer not in the manual?
General| Brand | Sagem Securite |
|---|---|
| Model | MorphoAccess J-Bio |
| Category | Touch terminals |
| Language | English |
Details the products covered in the MorphoAccess J Series user guide.
Provides essential safety guidelines and compliance information for product installation and use.
Describes the physical and logical interfaces of the MorphoAccess J Series terminal.
Explains the different methods for powering the terminal, including POE.
Covers the network interfaces used for terminal configuration and management.
Lists interfaces for connecting to access control systems and devices.
Guides on configuring the terminal's IP address for network connectivity.
Explains how to configure the terminal without a network connection using a USB key.
Explains how MorphoAccess parameters are stored, organized, and managed.
Covers the setup and management of MorphoAccess terminals in a networked environment.
Provides instructions on how to update the terminal's firmware.
Explains how to unlock additional features by installing licences.
Provides a flowchart illustrating the different recognition mode logic.
Describes enrolling users and managing the internal biometric database.
Overviews access control functionalities, operating modes, and result sending.
Explains the operating mode where the terminal is controlled remotely by a Host System.
Details how to configure and operate the terminal in identification mode.
Introduces authentication using contactless cards and supported card types.
Covers various authentication methods using cards or local databases.
Explains how to disable biometric checks, relying solely on User ID.
Explains the mode combining identification and contactless authentication.
Introduces the operating mode where the terminal is controlled remotely by a Host System.
Details the configuration required to activate the proxy mode.
Guides on configuring biometric recognition modes and timeouts.
Explains how to adjust the matching threshold for biometric recognition accuracy.
Covers the configuration and operation of the terminal's internal relay for door control.
Describes using the LED IN signal for integration with Central Security Controllers.
Explains how the terminal logs access requests for auditing purposes.
Details how the terminal communicates access results and User IDs to external controllers.
Covers the detection and handling of physical tampering events.
Explains how to enable and configure time-based access restrictions.
Explains the meaning of different LED pulse patterns and their examples.
Describes the terminal's state when waiting for a fingerprint in identification mode.
Shows the terminal's state when expecting a contactless card for authentication.
Illustrates the terminal state when waiting for either a finger or a card.
Details the visual and audible signals indicating successful access authorization.
Explains the signals and indications for denied access.
Describes the terminal behavior when a fingerprint input times out.
Shows the terminal state when no user records are available in the database.
Indicates when it is safe to remove the USB mass storage key after configuration.
Explains signals indicating ongoing maintenance or firmware update operations.
Describes the indicator for a failure in the biometric sensor's startup process.
States the compatibility of the J Series with older MorphoAccess models.
Presents parameter equivalences between J Series and 200/300 Series models.
A table summarizing different contactless card operations and their settings.
Lists the essential data tags needed on contactless cards for various operations.
Provides solutions for common issues encountered with the terminal.
Lists related documentation and resources for further information.
Provides contact details for general customer service inquiries.
Offers contact information for technical support and hotline services.
To Next Page
