58 DOCUMENT SSE-0000077399-01 - VERSION 1.0 - MAY 2010
S
AGEM SÉCURITÉ DOCUMENT - REPRODUCTION AND DISCLOSURE PROHIBITED
Proxy mode activation MORPHOACCESS® J SERIES – User Guide
2. Proxy mode activation
To enable the proxy, all identification and authentication modes must be
disabled. It means that all controls must be turned off: the terminal becomes a
slave of the host system (the access control application is running on the host
system).
Proxy mode
app/bio ctrl/identification 0
app/bio ctrl/authent card mode 0
app/bio ctrl/authent PK contactless 0
app/bio ctrl/authent ID contactless 0
app/bio ctrl/bypass authentication 0
To Next Page
Loading...
