DOCUMENT SSE-0000077399-01 - VERSION 1.0 - MAY 2010 75
S
AGEM SÉCURITÉ DOCUMENT - REPRODUCTION AND DISCLOSURE PROHIBITED
MORPHOACCESS® J SERIES – User Guide Setting up time mask
TERMINAL CUSTOMIZATIONTERMINAL CUSTOMIZATIONTERMINAL CUSTOMIZATIONTERMINAL CUSTOMIZATIONTERMINAL CUSTOMIZATIONTERMINAL CUSTOMIZATION
8. Setting up time mask
When using MEMS™, a time mask feature is available. This mode enables the
access according to its time mask. Time mask is defined by slots of 15 minutes
over a week.
To use this feature the local database must have been created with
a specific additional field. If this field does not exist activating
this feature will forbid the access to every user.
Please refer to MorphoAccess
®
Host Interface Specification to understand how
to create a database with time mask feature.
Time mask activation
app/modes/time mask 1 (Enabled)
To Next Page
Loading...
