DOCUMENT SSE-0000077399-01 - VERSION 1.0 - MAY 2010 21
S
AGEM SÉCURITÉ DOCUMENT - REPRODUCTION AND DISCLOSURE PROHIBITED
MORPHOACCESS® J SERIES – User Guide Configuring a networked MorphoAccess®
TERMINAL CONFIGURATIONTERMINAL CONFIGURATIONTERMINAL CONFIGURATIONTERMINAL CONFIGURATIONTERMINAL CONFIGURATIONTERMINAL CONFIGURATION
Then the client (the PC) can send biometric templates to the terminal and
manage the local database.
Please refer to MorphoAccess
®
Host System Interface Specification for a
complete description of remote administration command set. This document
also explains how to create a database and store biometric records in this base.
Network factory settings
By default the terminal IP address is 134.1.32.214. This address can be
changed through IP (Configuration Tool) or with a USB flash drive (USB
Network Tool).
The default server port is 11010.
Date/Time settings
The date/time of the terminal can be initialized by a distant host system using
an application such as the "Configuration Tool" ("More" button) described
below.
SSL securing
This remote management TCP link can be secured using SSL. Please refer to
SSL Solution for MorphoAccess
®
document for further details.
Modifying a configuration key using "configuration tool"
Configuration Tool can modify MorphoAccess
®
parameters. This program is
an illustration of use of the TCP API. Please refer to Configuration Tool User
Guide for further information about this program.
To Next Page
Loading...