6-
dvanced parameters
F@ST 2704R Reference Manual - 253526032-A
Sagemcom Broadband SAS document. Reproduction and disclosure prohibited
Page 6-69
Add
• Click on the Add button to display the following screen:
Field
Action
Name Enter a representative name.
Enable
Select from the scroll down list:
• Disable: To disable the QoS queue entry
• Enable: To enable the QoS queue entry
Interface
Select from the scroll down list:
• Blank
• 8/32: Interface name.
Queue Precedence
Select from the scroll down list:
• Blank
• 1: High priority for this queue,
• 2: Medium priority for this queue,
• 3: Low priority for this queue.
Note: A high priority leads to low packet loss.
Queue Scheduler
a
Select from the list:
• Weighted Round Robin
• Weighted Fair Queuing
Queue Weight
[1-63]
a
Enter the corresponding value of the queue weight.
DSL Latency
a
Select the DSL latency from the scroll down list.
a. This field appears only if the DSL mode selected is IPOA.
To Next Page
Loading...
Need help?
General
