SAGEMCOM F@ST 2704R - Page 73

6-
A
dvanced parameters
F@ST 2704R Reference Manual - 253526032-A
Sagemcom Broadband SAS document. Reproduction and disclosure prohibited
Page 6-23





6.4.2.1 Add

Note


You must have configured a DSL ATM interface (see section 6.4.1) to add a WAN
service.


• Click on the Add button.
• Select the DSL ATM interface for the WAN service.
• Click on the Next button to continue configuring the WAN service.

Note


Depending on the type of network protocol configured for the selected DSL ATM
interface (EoA, PPPoA or IPoA), the content of the following WAN interface
configuration screens differs.
Therefore, and for more clarity, each type of protocol will be dealt with separately
(screens + associated summary tables) below.