AK6-QE-006-03 - 1- 05/2017
1. Intent of the Document
This manual explains the unpacking and installation procedure for Tissue-Tek Prisma
®
Plus
Automated Slide Stainer.
2. Important Information
2-1. Overview
1) This unpacking and installation work must be done by personnel who have a complete
understanding of this manual before the work and skills to perform the procedure as described in
the manual.
2) The information contained in this manual is important for securing worker safety during the work
and avoiding a complaint from customer after installation.
* Follow the procedure and methods described in the manual to finish the work properly.
3) Take care not to damage the instrument during the work. If damage is found or given, contact the
instrument distributor or representative to take proper corrective actions.
2-2. Precautionary Indication
Explained below are the symbols used in this manual or on labels attached to the system.
The sections and sentences accompanying the following symbols provide particularly important
information for ensuring worker’s safety, preventing instrument failures and improving work efficiency.
Be sure to check these symbols, before commencing the work, and observe specified instructions.
The section accompanying this symbol specifies a prohibited item. Always follow the
instruction.
Example: No Open Flame
The section accompanying this symbol specifies an action that must be taken. Always follow
the instruction.
Example: Grounding
The section accompanying this symbol specifies a cautionary item. Improper handing
against the instruction may put worker in danger or damage the system.
When only this symbol is indicated, check the operating manual or an appropriate part of
this manual for details of precautionary instruction.
Example: Biohazard
Example: High Temperature
Example: Electric Shock
To Next Page
Loading...
Need help?
General
