Sakura Tissue-Tek Prisma Plus Prisma-P-AD User Manual

AK6-QE-006-03 - 3- 05/2017
3. Workflow
Below is the workflow of installation and system setup.
4. Tools Required
Following is a list of tools necessary for the work.
Description Size Q’ty
Carrying handles
−
4
Phillips screwdriver ISO No.2 1
Adjustable wrench 300mm or wider 1
Spanner or box end wrench Width across flats 24mm 2
Pipe wrench *1 200mm or wider 1
Convex rule
2.5m or longer
Measureable rule
1
Level
−
1
Cutter
− １
*1: It is used to screw a street elbow at installation of ED or ES models
6. Unpacking Workplace
11. System Setup
12. Delivery to User
9. Installation
5. Installation Conditions and Operating Environment
7. Transport to Installation Place
8
.
Unpacking Procedure
10
. Power
-
on

Sakura Tissue-Tek Prisma Plus Prisma-P-AD Specifications

General

Brand	Sakura
Model	Tissue-Tek Prisma Plus Prisma-P-AD
Category	Laboratory Equipment
Language	English