Sakura Tissue-Tek TEC 6 - Unpacking Method of the Embedding Module

34
2.1.3 Unpacking Method of the Embedding Module
How to remove the instrument from the packing box that has been carried
in, and remove the protective materials, is explained in this document. To
perform each work safely and correctly, be sure to follow the procedure
specied herein.
CAUTIONS:
• Confirm before unpacking the instrument, that the packing
materials have not been damaged due to external forces
applied during transport.
• Unpacking of the instrument should be performed by staff
trained in the instrument.
• The instrument itself weighs approx. 25 kg. At least two
people should work together when lifting or moving the
instrument.
• When lifting the instrument, bend your knees fully or
otherwise assume a natural posture.
• Do not put down the instrument in an unstable place or on a
floor with insufficient strength.
Unpacking the Instrument
1. Cut the two bands with a cutting knife, etc. and remove the cap.
2. Take out the Operating Manual and remove the sleeve.
CAUTION
Cap
Band
Sleeve
Operating Manual