Sakura Tissue-Tek TEC 6 User Manual

3. Explanation of Operations
71
3.3 Handling of Standard and Optional
Accessories
How to install and handle the accessories is explained. For optional
accessories, please order from the Sakura instrument distributor.
3.3.1 Wrist Rest
The wrist rest can be attached to reduce the stress the wrist receives from
work, and to prevent burns.
Attaching the Wrist Rest
After cleaning the hand rest surface and the groove, hook the rear side of the
wrist rest at the groove between the hand rest and the hot plate [1], and push
the wrist rest into a recess (attachment point) on the front side [2].
CAUTION:
To remove the wrist rest, carefully push it up from the recess
on the front side, using the scraper, etc. to avoid injuring your
fingertip.
3.3.2 Wrist Rest Cushion
A cushion can be
attached on the hand
rest or wrist rest.
The cushion is made of
a self-adhesive material,
so clean the attaching
surface and simply press
the cushion onto the
surface.
ハ ンドレスト 窪み溝 ホ ットプ レ ート
[1]
[2]
Hot plateRecessHand restGroove
CAUTION
Wrist rest cushion
Wrist restHand rest

Sakura Tissue-Tek TEC 6 Specifications

General

Brand	Sakura
Model	Tissue-Tek TEC 6
Category	Control Unit
Language	English