6. Replacement Parts
97
6.1 Replacement Parts
When replacing consumables or options, use the parts specified in this
manual. Use of other parts may result in malfunction or failure.
6.1.1 Embedding Module
Description Product code
Quantity
TEC 6-EM-J0 TEC 6-EM-A1 TEC 6-EM-E2 TEC 6-EM-JC2 TEC 6-EM-J2
Warming chamber tray
(large)
5120 1 1 1 1 1
Tray (small) 5782 1 1 1 1 1
Scraper 1550 1 1 1 1 1
Tamper (large) 1551 1 1 1 1 1
Tamper (small) 1552 1 1 1 1 1
Foot pedal 5785 1 1 1 1 1
Base mold dividers 5783 1 1 1 1 1
Magnifying lens
assembly with wrench
and dust cover
5127 1 1 1 1 1
Wrist rest R 5121 1 1 1 1 1
Wrist rest L 5122 1 1 1 1 1
Wrist rest cushion R 5123 1 1 1 1 1
Wrist rest cushion L 5124 1 1 1 1 1
Screen protection sheet 5125 1 1 1 1 1
Power cord A4010541 1 - - - -
A4010537 - 1 - - -
A4010534 - - 1 1 1
6.2 Service Life and Maintenance
The service life of the instrument is 8 years after shipment from manufacturer.
Conditions: Follow the precautions for use and periodic maintenance
procedures described in this operating manual. Replace the following major
components as needed to maintain the proper operations of the instrument.
Major components Life of use
Controller board 5 years
Control panel display 5 years
Power unit 5 years
Temperature sensor 5 years
Cold spot unit 5 years
Heater unit 8 years
Solenoid valve unit 8 years
Fan unit 8 years
Work light 5 years
* The service life of the instrument and major components is not a warranty
period but average life of use which depends on conditions, how to use, etc.
To Next Page
Loading...
Need help?
General
