Sakura Tissue-Tek TEC 6 User Manual

68
3.2.4 Turning On/Off the Work Light
Touching the “Light” button [1] on the Operation screen turns on the work
light to brighten the dispensing area. Touching the “Light” button [2] again
turns off the work light.
NOTE:
The “Light” button [1] is displayed when the paraffin temperature
reaches an appropriate level and paraffin can be dispensed.
Adjusting the Brightness
Touch the “Light” button on the Operation screen to turn on the work light,
and the “Brightness Setting” button [1] will appear below the “Light” button.
The brightness increases by one level every time the “Brightness Setting”
button is touched. There are ve brightness levels, and once the brightness
is increased to the highest level, the next touch of the button brings it back to
the lowest level.
>
Touch
>
Touch
>
Touch
>
Touch
>
Touch
>
Touch
Level1 Level2 Level3 Level4 Level5 Level1
[1] [2]
[1]

Sakura Tissue-Tek TEC 6 Specifications

General

Brand	Sakura
Model	Tissue-Tek TEC 6
Category	Control Unit
Language	English