03233A(E)-CHAPTER 2 10/30/03 4:00 PH Page i
INSTALLATION
Connecting VHF and UHF Antennas
If yoH_ antenna has a set o[" leads that
look like this, see "Antennas with
300-ohm Flat ]_,_'in Leads," below.
If you[ antenna has one lead that boks
like this, see "Antennas with 75-ohm
Round Leads," on page 2.2.
If you have two antennas, see "Sepa_mte
VHF and UHF Amen_las," on pase 2,2,
Antennas with 3O0=ohm Flat Twin Leads
If"you aue Hsing an off-air al_tenna (such as a r'oof' antenna o_ "l_fl_bit ea_s") that has
30()-otun twin fiat leads, follow the diieciions below.
1
Place mere _resTron {ne
/viiq le_lds unoel _[i[
screws on me 300-75
ohm ads[)[( r tno[ sup-
plleoh use 8 soreworlve
_0 qgrlten [lte screw_
2
Plugme aoaFor _mo
#_eVHHUHFterminal
)ntne r 3ttom of the
OaCK [ -3rlet
Antennas with 7S-ohm Round Leads
){ v: <
Plug the amenna !ead
intothaVHF/UHE
terminal on_hebottom
.1 CHAPT] }_ TWO: ]]Xfhl/q j <Ilion
To Next Page
Loading...