SHR-2160/2162/2080/2082 USER’S MANUAL
2-5
English
[Setting the jumper]
[How to Add an HDD]
1. To remove the product’s cover, take out the screws on the left and right sides (5 spots each)
and on the back (1 spot).
■ HDD jumper for Primary Master and Primary Slave.
■ Jumper setting for Secondary Master and Secondary Slave.
The jumper setting method is illustrated on the surface of the purchased HDD.
Using SAMSUNG hard disk, the jumper setting method is as follows:
SHR-2160/2162/2080/2082-E-0 10/18/07 3:55 PM Page 2-5
To Next Page
Loading...
