SHR-2160/2162/2080/2082 USER’S MANUAL
2-13
English
4. Remove the bracket-HDD (A) from the product by separating the power supply cable, signal
transmission cable (IDE cable), and fan cable then pulling it toward the center of the product
to separate its fixed part from the bottom. Remove the bracket-HDD (B) by lifting it up after
removing the screws.
BRACKET-HDD(A)
BRACKET-HDD(B)
SHR-2160/2162/2080/2082-E-0 10/18/07 3:55 PM Page 2-13
To Next Page
Loading...
