24 _ the basics
CHANGING THE SETTINGS AND PREFERENCES (Continued)
FM Radio setting options
Mode: You can switch to Manual or Preset mode. Select either <Manual> or
<Preset>. If no preset frequencies are set, the player will not switch to Preset
mode.
Auto Preset: Automatically scans for available frequencies. See page 25.
FM Region: You can change an FM area setting in preparation for overseas
travel. Select
from
<Korea/US>, <Japan>, and <Other Countries>.
FM Sensitivity: To receive more or fewer FM radio frequencies, adjust the <FM
Sensitivity>. Select either <Low>, <Middle>, and <High>. If you select <High>, the
more frequencies can be received.
RDS Display : Radio Data System(RDS) provides the reception and display of
messages such as broadcasting information.
Select either <Program T
ype> or <Program Service>. See page 26.
Your previously stored radio frequencies will be deleted when you change
the <FM Region> on your player.
FM region can be deleted or changed according to the target region of the
player.
Frequency range by region
- Korea/US: Search for FM frequencies in 100 kHz increments between
87.5 MHz~108.0 MHz.
- Japan: Search for FM frequencies in 100 kHz increments between 76.0
MHz~108.0 MHz.
- Other Countries: Search for FM frequencies in 50 kHz increments
between 87.50 MHz~108.00 MHz.
NOTE
To Next Page
Loading...
