Samyung F430 - Alarm Settings Management; Depth Alarms; Temperature Alarms; Low Battery Alarm

Installation and Operation Manual
32
4-5 Alarm Settings
Press long then select Alarms
A warning message with beep sound is displayed when an alarm condition is met by user
setting. Press to clear the alarm. However, the alarm will be displayed again when the
alarm condition occurs again. The unit provides alarms for various functions.
4-5-1 Deep
Trigger an alarm when the depth value
received from the transducer is deeper than a
set value.
4-5-2 Shallow
Trigger an alarm when the depth value
received from the transducer is shallower
than a set value.
4-5-3 Temperature
Trigger an alarm when the reported
temperature from the transducer is same as
a set value.
4-5-4 Temperature rate
Trigger an alarm when the rate of
temperature change from the transducer is
same as a set value.
4-5-5 Low battery
Trigger an alarm when battery voltage is
lower than a set value.
4-5-6 AIS
See the Alarm option of 4-4 (AIS Settings).
4-5-7 Restore default
Returns every alarm settings to default.