Samyung F430 - General Operation; Power On and Off; Display Settings

Installation and Operation Manual
16
3-1 Power on and off
Manual power on
Press down to button until the display is
on.
Manual power off
Press and hold for 5 seconds. A counter
timer appears on the screen, if you release
the button before the countdown timer
reaches zero, the chart plotter will remain On.
3-2 Brightness, night mode and Background
You can change the screen setting for the
display. To change settings, shortly press .
Brightness
To change the brightness, select
Brightness, and press to dim or to
brighten.
Press to return to the previous
screen.
Night mode
Fishfinder has preprogrammed settings
allowing you to customize the look of the
Chart window. The default is daytime view.
Select Night mood depending on what
mode the display is in at the time of
selection.
To change mode:
1 Highlight Night mode.
2 Press or .
Tip: The screen will be difficult to read if
the fish finder is in night mood when the
sun is too bright
Background
You can Changes the background color if
necessary. This selection is a personal
preference. Select the option that gives you
the clearest viewing in your weather
conditions and viewing angle.
3 General Operation