6.3.8 TCAS
The TCAS page (see Figure 6-9) shows selections available for Traffic.
The multiple–choice list allows the operator to specify the type of Traffic
processor connected to the Traffic port. Select using the [UP]/[DOWN] Soft keys
and use the [SET] softkey to make the selection.
Once a selection is made, the port configuration for Traffic will be automatically
made based on the selection chosen and data will appear in the data VALUE area.
This page has an additional softkey labeled VALUE which can be used to scroll
through all of the TCAS DATA coming from the processor. Use the
[UP]/[DOWN] Soft keys to scroll through the various data items. Press the
[MODEL] Soft key to exit the "Value" scroll function.
If a ST3400 in the field is being upgraded to display Traffic, please contact the
factory for a software key necessary to enable the traffic display. The Traffic key
can be entered on this screen manually. Software 3.00 and above is required to
display traffic.
Figure 6-9: TCAS Select Maintenance Page (typical)
6.3.8.1 More Indicator
The More Indicator (see Figure 6-9) indicates more choices than the listings
currently displayed on the screen. An arrow pointing down indicates that more
choices exist below the last listing currently being displayed.
82002-IM-L ST3400 INSTALLATION MANUAL 6-13
To Next Page
Loading...
