7.2.10 Software CRC Page
The Diagnostics 2 page (see Figure 7-3) consists of readouts that allow the
operator to read CRC values of the data.
Figure 7-3: Internal Diagnostics 2
7.2.11 ST3400 CONFIGURATION
Configure and record configuration information from the ST3400 TAWS/RMI
Maintenance and Summary pages
Note: Meet all approved maintenance and safety conditions.
Use of appropriate ground power for the aircraft is required.
Note: Aircraft must be in the view of the GPS satellites for a valid
GPS Position. FMS may show invalid (depending on model) until valid
Groundspeed is achieved.
7-20 ST3400 INSTALLATION MANUAL 82002-IM-L
To Next Page
Loading...
