s30nmdl2sm-REV0808 Model S30 Non-Metallic Page 1
Santoprene
®:
Injection molded thermoplastic elastomer with no fabric layer. Long mechanical flex life. Excellent abrasion 275°F -40°F
resistance. 88°C -40°C
Virgin PTFE: Chemically inert, virtually impervious. Very few chemicals are known to react chemically with PTFE: molten alkali metals, turbulent
liquid or gaseous fluorine and a few fluoro-chemicals such as chlorine trifluoride or oxygen difluoride which readily liberate free fluorine at 350°F -35°F
elevated temperatures. 177°C -37°C
Polypropylene 180°F 32°F
82°C 0°C
PVDF 250°F 0°F
121°C -18°C
Materials Maximum Minimum
Temperature Limits
For specifi c applications, always consult “Chemical Resistance Chart” Technical Bulletin
SANDPIPER
®
pumps are designed to be powered only by compressed air.
INTAKE/DISCHARGE PIPE SIZE
3" ANSI Flange or
80mm DIN Flange
CAPACITY
0 to 238 US gallons per minute
(0 to 901 liters per minute)
AIR VALVE
No-lube, no-stall
design
SOLIDS-HANDLING
Up to .71 in. (18mm)
HEADS UP TO
100 psi or 231 ft. of water
(7 bar or 70 meters)
DISPLACEMENT/STROKE
.9 US gallon / 3.41 liter
CAUTION! Maximum Operating Temperature Limit is 180°F for Polypropylene and 250°F for PVDF Models.
Air Inlet Side View
Air Exhaust Side View
CE
U.S. Patent #
5,851,109;5,996,627;
400,210
Other U.S. Patents
Applied for
Quality System
ISO9001 Certifi ed
Environmental
Management System
ISO14001 Certifi ed
S30 Non-Metallic
Design Level 2
Ball Valve
Air-Operated
Double Diaphragm Pump
ENGINEERING, PERFORMANCE
& CONSTRUCTION DATA
To Next Page
Loading...
Need help?
General
