GB-13
PreparationConnectionsInitial SetupUsing the FeaturesUsing the Features
via USB port
Hints and Tips, Specification
and Safety Warnings
Connecting an AV Device with Composite Cable
Use the supplied earphone to audio cable and an AV cable to connect the TV’s AUDIO(L/R)/VIDEO input sockets to an external 1.
AV device’s composite audio/video sockets. (Video = yellow, Audio Left = white, and Audio Right = red)
Plug the connected devices into the mains socket before switching on the 2. I/O POWER ON/OFF switch at the bottom of the
TV.
Press the3.
button to turn on your TV.
Press the 4. Source button to display the input source list. Use the
buttons to select AV and then press the OK button or
the
button to confirm.
Satellite Receiver
COMMON INTERFACE
ANT 75 Ω
5V 50mA/Output
AV Cable (not included)
Earphone to
Audio Cable
(included)
Video Camera
VCR
DVD Player / Recorder
Set-top Box
Game Console
Yellow (VIDEO) Yellow (VIDEO)
Red (R) Red (R) Red (R)
White (L) White (L) White (L)
Connecting an Audio Receiver with Optical Cable
Use an optical cable to connect the TV’s OPTICAL output socket to an audio receiver’s OPTICAL input socket. 1.
Plug the connected devices into the mains socket before switching on the 2. I/O POWER ON/OFF switch at the bottom of the
TV.
Press the3.
button to turn on your TV.
Optical Cable
(not included)
Audio Receiver
Connecting Earphones
COMMON INTERFACE
ANT 75 Ω
5V 50mA/Output
Earphones Cable
(not included)
Connect your earphones to the TV's
HEADPHONE socket.
Before putting on earphones, turn the volume down then put the earphones on and slowly increase the volume until you reach a
comfortable listening level.
Listening to loud sounds for prolonged periods of time may permanently damage your hearing.
To Next Page
Loading...
Need help?
General