CI (Common Interface) (DTV Mode)
The common interface allows the use of a Common Access Module to enable you to view scrambled (pay to view) services. These
services are provided by TopUp TV (UK only) and others. The Common Access Module and viewing card can be obtained from the
service provider.
Do not repeatedly insert or remove the Common Access Module as this may damage the interface and cause a
malfunction.
This feature is not available in all countries.
To insert the Common Access Module
Before you insert the Common Access Module, ensure that the 1.
TV is switched off and the viewing card is inserted in accordance
with the Service Provider’s instructions.
Insert the Common Access Module into the slot to access the 2.
content that has been encrypted. Flip the Common Access
Module to another side and try again if you feel resistance.
Switch the TV on.3.
To remove the Common Access Module
Before you remove the Common Access Module, ensure that the 1.
TV is switched off.
Pull the Common Access Module from the slot.2.
Switch the TV on.3.
To view the module information
Press the 1. Menu button and then press the buttons to select the
Channel menu.
Press the 2.
buttons to select CI Information and then press the OK button
or the
button to confirm.
A CI Information Main menu will pop up. Press the 3. buttons to display
the Module Information, Smart Card Information, Language, Software
Download. (The information displayed may vary depending on different
Common Access Module.)
Press the 4.
Menu button to return back to the previous menu.
Press the 5. Exit button to exit the menu.
To Next Page
Loading...
Need help?
General